User manual

7 AIMB-203 User Manual
Chapter 1 General Information
1.6 AIMB-203 Board Diagram
Figure 1.2 AIMB-203 Board Diagram
1.7 Safety Precautions
Intel Core i7/i5/i3/
Pentium/Celeron
processor
BIOS
Infineon SLB9635 TPM
1.2 (Optional)
4 x RS-232, 1 x RS-232/422/485,
PS/2, WDT, LPT, 8 bit GPIO
Audio Codec
Realtek ALC892
NCT6106D
Fintek 81216HD
4 RS-232 COM
Flex Display
Interface
DMI x 4
H81
PCIe x 16
DDR3/DDR3L 1333/1600 MHz SO-DIMM
DDR3/DDR3L 1333/1600 MHz SO-DIMM
Channel A
Channel B
LAN1: GbE Realtek 8111E
Mini PCIe 1 colay mSATA
PCIe x 16
LPC
HD Audio
SPI
CRT
Display Port 1.2
2 SATA 3 PORTS
6 USB Ports
Display port
CRT
DVI
PCIe x1
SATA/PCIe x 1
Mini-PCIe 2 with SIM Card Holder
PCIe x1
USB
USB
LAN2: GbE Realtek 8111E
PCIe x1
SATA 3
USB 2.0
1 SATA 2 Port
SATA 2
LVDS
2 USB Ports
2 x 6W Amplifier
USB 3.0
24/48 bit
Warning! Always completely disconnect the power cord from chassis whenever
you work with the hardware. Do not make connections while the power
is on. Sensitive electronic components can be damaged by sudden
power surges. Only experienced electronics personnel should open the
PC chassis.
Caution! Always ground yourself to remove any static charge before touching the
motherboard. Modern electronic devices are very sensitive to electro-
static discharges. As a safety precaution, use a grounding wrist strap at
all times. Place all electronic components on a static-dissipative surface
or in a static-shielded bag when they are not in the chassis.
Caution! The computer is provided with a battery-powered real-time clock circuit.
There is a danger of explosion if battery is incorrectly replaced. Replace
only with same or equivalent type recommended by the manufacturer.
Discard used batteries according to manufacturer's instructions.
Caution! There is a danger of a new battery exploding if it is incorrectly installed.
Do not attempt to recharge, force open, or heat the battery. Replace the
battery only with the same or equivalent type recommended by the man-
ufacturer. Discard used batteries according to the manufacturer’s
instructions.