User's Manual

2.3 Sleep Mode

While the computer is running, push the Power Button for 1 second will move the

equipment into sleep mode for power saving. Push the Power Button again will

enable the backlight again.

2.4 Operate the computer

AIM-37AT is equipped with a 10.1” Capacitive Touch Panel. Use finger to touch the

following Active Area to operate the computer.

2.5 LED indicator status

AIM-37AT is equipped with two LED indicators. The following tables show LED status

of each indicator.

2.5.1 Power LED

AIM-37AT power LED has three colors: Red, Green, Blue.

a) The Red LED blinks when internal battery capacity is below 10% to warn the user

to charge.

b) The Blue LED lights up when internal battery is being charged.

c) The Green LED lights up when internal battery has been fully charged.

Active Area