Specifications

Chapter 2 Installation 11
through cable or crossover cable. The connection can be made from
ADAM-6541’s ports to other Hub or Switch, such as MDI-X port or uplink
MDI port.
ADAM-6541 supports auto crossover to easily and flexibly network users’
connections. You can connect any RJ-45 (MDI-X) station port on the switch
to any device such as a switch or a bridge or router.
2.4.3 Connection to fiber network
Connecting to the fiber network segment with three-bud fiber. You can use
fiber standards via 50/125, 62.5/125 µm (Core/Clad). With fiber optic, it trans-
mits speed up to 100 Mbps and you can prevent noise interference from the
system and transmission distance up to 2 km.
2.4.4 Power Connection
You should take the following steps to connect ADAM-6541 power.
1. Connect the power cable to 2-pin connector
2. Connect power cable to power adapter
Note: Please plug in a dust cover of fiber port to prevent from dust as
you don’t use fiber port.