Specifications

10 ADAM-6541 manual
Piggyback Stack
ADAM-6541 can be stacked as seen in the figure below.
Figure2-5 Piggyback Stack
2.4 Network Connection
2.4.1 Connection to the devices
The ADAM-6541 consists of one fiber and one RJ-45 port.
Each of the converter’s twisted-pair ports can be used to connect a station or
other device. Use a straight-through twisted-pair cable with RJ-45 connectors
on both ends. The twisted-pair cable extended from a twisted-pair port is
called a “twisted-pair segment,” that can be up to 100 meters long. You can
connect any RJ-45 (MDI-X) station port on the switch to any device that uses
a standard network interface such as a workstation or server.
2.4.2 Connection to other Hubs or Switch
ADAM-6541 has an RJ-45 port that supports the connection to 10Mbps
Ethernet or 100Mbps Fast Ethernet, and half or full duplex operation.
ADAM-6541 can be connected to other hub or switch via a two-pair straight