User Manual

127 ADAM-6200 User Manual
Appendix A I/O Modbus Mapping Table
Note:
1. Users can configure the High alarm value in the ADAM.NET utility. When AI
value is higher than the High alarm, this bit will be 1.
2. Users can configure the Low alarm value in the ADAM.NET utility. When AI
value is lower than the Low alarm, this bit will be 1.
3. The value definition of AI Status
4. Type code table
A.1.3 ADAM-6224 4-ch Isolated Analog Output Module
Address (0X):
Address (4X):
Bit Description
0 Failed to provide AI value (UART timeout)
1 Over Range
2 Under Range
3 Open Circuit (Burnout)
7 AD Converter failed
9 Zero/Span Calibration Error
Input Range Type Code (HEX)
+/- 10V 0x0143
+/- 5 V 0x0142
+/- 1 V 0x0140
+/- 500 mV 0x0104
+/- 150 mV 0x0103
+/- 20 mA 0x0181
0 ~ 20 mA 0x0182
4 ~ 20 mA 0x0180
Address (0X) Channel Description Attribute
00001 0
DI Value
Read
00002 1 Read
00003 2 Read
00004 3 Read
Address (4X) Channel Description Attribute
40001 0
AO Value
R/W
40002 1 R/W
40003 2 R/W
40004 3 R/W
40101 – 40102 0
AO Status
Read
40103 – 40104 1 Read
40105 – 40106 2 Read
40107 – 40108 3 Read