Instructions

ADAM-6000 User Manual 72
Figure 6.9 ADAM-6015 Channel Configuration
The Input Tab
This tab shows the current values of the analog input channels. Select the analog
input channels you want to monitor by checking the box in the Enable column and
then click Apply. If the analog input value is out of the input range, you will see
"Over(L)" in the box for the corresponding channel. At the right side, you can see the
current digital input value by DI 0 and DI 1 LED display. You also can view the graph-
ical historical trend of analog input channel by clicking the Trend Log button. All the
operations for trend logging are the same as those for the ADAM-6015, ADAM-6017,
and ADAM-6018.
The Output Tab
This tab shows the current analog input values in decimal and hex format for all
related Modbus address. From the Output tab, you can set the value of an analog or
digital output channel as well as configure all related settings.
Figure 6.10 ADAM-6024 Output Tab