Instructions

ADAM-6000 User Manual 68
Figure 6.7 Analog Input Trend Log
With the wire burnout detection function of the ADAM-6015 and ADAM-6018, if there
is no sensor connected to an input channel, you will see the message "Burn out"
appear in the Information box of the related channel.
The Average Setting Tab
The ADAM-6015, ADAM-6017, and ADAM-6018 feature an averaging function that is
executed by the built-in processor. To use this function, simply check the channels of
interest in the Average setting tab. In the example above, the averaging function
has been enabled for four channels (Channels 0~3). Once enabled, the average
value of the selected five channels will be displayed in the Average box.