Instructions

65 ADAM-6000 User Manual
Chapter 6 System Configuration Guide
6.4 Analog Input Modules (ADAM-6015, ADAM-
6017, and ADAM-6018)
6.4.1 All-Channel Configuration
For these ADAM-6000 modules, when you click an all-channel configuration item in
the Module Tree Display Area, the four main parts of interest in the Status Display
Area will be the Input Range, Integration Time, Calibration, and Channel Informa-
tion panels.
Figure 6.6 Channels Range Configuration Area
Input Range
This panel allows you to set a different range for each channel. To do this, select the
channel number from the Channel box, select the range from the Range box, and
then click Apply to accept the changes.
Integration Time
To remove noise from the power supply, ADAM-6000 series analog input modules
feature a built-in filter (50 and 60 Hz). For this setting, select the filter you wish to
apply from the Integration Time box. Then, click Apply to accept the changes.
Calibration
Before you can adjust the calibration settings, you will need to enable the calibration
function. To do this, click Allow Calibration under the Setup menu.