Instructions

ADAM-6000 User Manual 56
The Network Tab
This tab contains two main panels: the Network Settings panel and the Application
Network Settings panel. The content of these panels is described in the following
text.
The Network Setting Panel
This panel is for adjusting typical network configuration settings for ADAM modules.
Here, you can set the network connection protocol (DHCP or static IP), IP address,
subnet address, default gateway, and host idle time (timeout).
The Application Network Settings Panel
This panel is for configuring the datastream and P2P/GCL port. When Network Diag-
nostic is selected, the ADAM module will periodically monitor and diagnose the
Ethernet switch. If the Ethernet port is not used for communication, this function
should be disabled.
Note 1: When a web browser is used to open the web page on an ADAM-6000 mod-
ule, a Java virtual machine (JVM) will use several TCP connections to download a
Jar file. These connections will be released after the Jar file has been downloaded.
Note 2: After the GCL/P2P port settings have been modified, the module will reboot
automatically (connection recovery time: 3 s).