Instructions

41 ADAM-6000 User Manual
Chapter 5 Introduction to Digital ADAM-6000 I
/
O Modules
5.5.2 Application Wiring
Figure 5.9 ADAM-6060 Digital Input Wiring
Figure 5.10 ADAM-6060 Relay Output Wiring
5.5.3 Address Assignment
Based on the Modbus/TCP standard, the addresses of ADAM-6000 module I/O
channels you place in the system are defined by a simple rule. Refer to Appendix
B.2.8 for information on mapping the I/O addresses. All inputs in the ADAM-6060 can
be configured to be used as 32-bit counters (each counter consists of two addresses:
a low word and a high word) by using Windows Utility (see Section 6.3).