Instructions

25 ADAM-6000 User Manual
Chapter 4 Introduction to Analog ADAM-6000 I
/
O Modules
Analog Input
 Channels: 8 (differential)
 Input impedance: >10 M
 Input type: Thermocouple
 Thermocouple type and range:
– Type J: 0~760°C
– Type K: 0~1370°C
– Type T: -100~400°C
– Type E: 0~1000°C
– Type R: 500~1750°C
– Type S: 500~1750°C
– Type B: 500~1800°C
 Accuracy: ±0.1% or better
 Span drift: ±25 ppm/°C
 Zero drift: ±6 mV/°C
 Resolution: 16-bit
 Sample rate: 10 Hz
 CMR @ 50/60 Hz: 90 dB
 NMR @ 50/60 Hz: 60 dB
 Overvoltage protection ±35 V
DC
 Built-in TVS/ESD protection
 Wire burnout detection
Digital Output
 Channels: 8
 Sink type: Open collector to 30 V, 100 mA (max. load)
 Power dissipation: 300 mW for each module
General
 Built-in watchdog timer
 Isolation protection: 2000 V
DC
 Power input: Unregulated 10~30 V
DC
 Power consumption: 2 W @ 24 V
DC
 Power reversal protection
 Operating humidity: 20~95% RH (non-condensing)
 Storage humidity: 0~95% RH (non-condensing)
 Operating temperature: -10~70°C
 Storage temperature: -20~80°C