Manualshelf

Instructions

ManualsBrandsADVANTECH ManualsRemote MaintenanceI/O module DO, DI No. of inputs: 6 x
31323334353637383940
23 ADAM-6000 User Manual
Chapter 4 Introduction to Analog ADAM-6000 I
/
O Modules
4.3.2 Application Wiring
Figure 4.3 ADAM-6017 Analog Input Wiring
The ADAM-6017 has a 120- resistor built in to each channel; thus, no additional
resistors need to be added for current input measurements. Simply adjust the jumper
setting according to the input type you require. Figure 4.3 shows the jumpers for set-
ting the inputs to voltage mode or current mode.
Figure 4.4 ADAM-6017 Analog Input Type Setting
Figure 4.5 ADAM-6017 Digital Output Wiring