Instructions

ADAM-6000 User Manual 22
Jumper Settings
To simplify the jumper settings, for the ADAM-6017 (D version), you can set the ana-
log input type to voltage or current by adjusting the switch without opening the case.
Figure 4.2 ADAM-6017 Jumper Switches
ADAM-6017-CE ADAM-6017-AE&BE
Channel Number Select Jumper Channel Number Select Jumper
CH0 CN3 CH0 JP6
CH1 CN4 CH1 JP7
CH2 CN5 CH2 JP8
CH3 CN6 CH3 JP1
CH4 CN7 CH4 JP2
CH5 CN8 CH5 JP3
CH6 CN9 CH6 JP4
CH7 CN10 CH7 JP5
Switch SW1 SW2
Analog input channel CH0 CH1 CH2 CH3 CH4 CH5 CH6 CH7
Switch ON Current input mode
Switch OFF (default) Voltage input mode
Note! Using tools wider than 0.65 mm to adjust the switch will result in damage
to the switch.