Instructions

21 ADAM-6000 User Manual
Chapter 4 Introduction to Analog ADAM-6000 I
/
O Modules
Analog Input
 Channels: 8 (differential)
 Input impedance: >10 M (voltage), 120  (current)
 Input type: mV, V, mA
 Input range: ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V, 0~150 mV, 0~500 mV, 0~1 V,
0~5 V, 0~10 V, 0~20 mA, 4~20 mA, ±20 mA
 Accuracy:
– ±0.1% of FSR (voltage) @ 25°C
– ±0.2% of FSR (current) @ 25°C
 Span drift: ±25 ppm/°C
 Zero drift: ±6 mV/°C
 Resolution: 16-bit
 Sample rate (total):
– 10 Hz
– 100 Hz (CE version only)
 CMR @ 50/60 Hz: 90 dB
 NMR @ 50/60 Hz: 67 dB
 Calibration: Auto calibration
 Burnout detection (4~20 mA only)
 Common-mode voltage: 350 V
DC
Digital Output
 Channels: 2
 Sink type: Open collector to 30 V, 100 mA (max. load)
 Power dissipation: 300 mW for each module
 Output-delay on: 100 µs
 Output-delay off: 150 µs
 Overvoltage protection (max.): 42 V
DC
 Overcurrent protection (max.): 2 A
 Leakage current: 200 µA (max.) for D version
General
 Isolation protection: 2000 V
DC
 Power input: 10~30 V
DC
 Power consumption: 2.7 W @ 24 V
DC
 Power reversal protection
 Operating humidity: 20~95% RH (non-condensing)
 Storage humidity: 0~95% RH (non-condensing)
 Operating temp (exclusive of RTC function): -20~70°C (-40~70°C for D version)
 Storage temp (exclusive of RTC function): -30~80°C (-40~85°C for D version)
 Watchdog timer (system): 1.6 s
 RTC (D version only): ISO8601 format
Note! The operation/storage temperature for the RTC function is -30~70°C.