Instructions

153 ADAM-6000 User Manual
Chapter 8 Graphic Condition Logic (GCL)
Figure 8.1 GCL Configuration Environment
GCL Menu Area
The icons in the GCL Menu Area are explained in the following table:
Icon Function Description
Current
Status
This icon shows the current GCL status. The status is either
disable, programming, or running mode (from top to button).
Note: You cannot enable peer-to-peer/datastream function and
GCL function at the same time. So if you want to enable GCL,
the peer-to-peer and datastream function will be disabled auto-
matically.
Run GCL When running mode is selected, this button will be lit.
Program GCL When programming mode is selected, this button will be lit.
Disable GCL When disable mode is selected, this button will be lit.
IP Table
Configuration
Click this button to configure IP table, which can used to define
the output destination. This is available only in programming
mode.
Monitoring
Click this to enable online monitoring. This is available only in
running mode.
Upload
Project
Click this to upload a GCL configuration from the module to the
computer. This is available only in programming mode.
Download
Project
Download the current GCL configuration to the module. This is
available only in programming mode.
Project
Content
Click this show the current GCL configuration. You can also
save the current configuration to file or load a previous configu-
ration from a saved file.