User Manual

81 Chapter 5
With the wire burn-out detection function of ADAM-6015 and
ADAM-6018, if there is no sensor connected to the input channel of
ADAM-6015 or ADAM-6018 module, you can see “Burn out” characters
showing in the text box of related channel.
2. Average Setting
ADAM-6015, ADAM-6017 and ADAM-6018 modules feature averaging
calculation function by its built-in processor. You can simply click the
check boxes representing the channels in the Averaging channel setting
area to decide which channels are used for averaging. For example, by
Figure 5.8 below, five channels (channel 0, 1, 2, 3, and 4) are used for
averaging. So you can see the average value of those five channels dis-
played by the Average text box.
Figure 5.9: Analog Input Average Setting