User Manual

ADAM-6000 Series User Manual 78
In order to remove the noise from the power supply, these analog input
modules feature built-in filter. Two filters with different frequencies are
provided to remove noise generated from different power supplies. The
Integration Time Configuration area is under the Channels Range
Configuration area. Refer to Figure 5.6 below. In the Integration Time
Configuration area, you can select suitable filter in the Integration time
combo box. After selecting appropriate filter, click the Apply button.
Figure 5.7: Integration Time Configuration Area
Note: Enable the calibration function before calibrating.
For ADAM-6015, ADAM-6018, ADAM-6024 modules, you can per-
form calibration with the following steps: