User Manual
ADAM-6000 Series User Manual 72
device without routing from SCADA system, for example, user can use
Web browser of smart phone to remotely access I/O module via HTTP.
Group Configuration
In certain application scenarios, it’s necessary to set multiple modules
with the same settings because these modules are doing the same tasks on
different sites. Users have to set configurations of module one after
another before on-site deployment. After the modules are installed and
the system is running, it will still require repetitive effort to carry out
firmware updates.
Setting Step:
1. Select Firmware or Configuration
2. Select I/O module
3. Click Browse button to import the firmware or configuration file
from your computer.
4. Choose which module you're going to change its setting and enter
the password.
5. Click the Apply button to activate it, and then you will see the
operating progress on the Status area.
Note! The default password is 00000000