User Manual

ADAM-6000 Series User Manual 70
ADAM-6000 modules can actively send its data to Hosts periodically. It
is called Data Stream. In this tab, you can define IP address of the Hosts
receiving the data transferred by ADAM-6000 modules, as well as the
period how often ADAM-6000 modules will send data to the Hosts.
Note: Set the period by Data Streaming tab at right. ADAM-5000/TCP
Event Trigger tab is for ADAM-5000.
Administration
In this tab, you can set up password for selected ADAM-6000 module.
You need to type current password in the Old password text box, and the
new password in the New password and Verify password text box.
There will be many configuration and operation action asking user to type
password, so this can help to ensure safety. You can reset and restart the
module in the tab.
Note: The default password is 00000000
Reset to default factory settings
The system configuration of ADAM-6000 modules will be clear and
restored to factory default when it enabled.
System Restart
Different from “Reset to Factory”, System Restart retains your previous
settings.