User Manual

69 Chapter 5
ADAM.NET Utility Status Display - Network
Network Setting:
Typical network configuration for ADAM module. You can select the
Connection mode as DHCP or Static IP, IP address, Subnet address,
Default gateway and Host Idle (timeout).
Application Network Settings:
You can configure data stream, P2P/GCL port in this area.
When Network Diagnostic is selected, the ADAM module can periodi-
cally actively monitor and diagnose the Ethernet switch. If you don't use
the Ethernet port for communication, please disable this function.
Stream
Note: When you use web browser to open the web page on
Adam-6000, the JVM (Java Virtual Machine) will use
several TCP connections mentioned above to down-
load .jar file. Those connections will be released after
the .jar file is downloaded completely.