User Manual

67 Chapter 5
ADAM.NET Utility - Search Device
You need to change IP of the ADAM-6000 modules the same subnet with
the host PC. Type the correct IP address, Subnet address, and Default
gateway on the Status Display area. After complete setting, click the
Apply Change button. A dialog box appears asking you to type the pass-
word. The default password of ADAM-6000 module is 00000000.
You can change the password later. After you type the correct password,
the ADAM-6000 module is now under IP of your host PC.
When you select the IP address of the ADAM-6000 modules you want
use in Module Tree Display area, there will be 8 tabs appearing in the
Status Display area for you to set up general configuration of that mod-
ule. Refer to figure below. Once you have changed any configuration,
remember to click related Apply or Apply Change button.
Below is detailed information for the 8 tabs in the Status Display area: