User Manual

ADAM-6000 Series User Manual 66
Status Display Area
Status Display area, on the right part of utility operation window, is the
main screen for operation. When you select different items in Module
Tree Display, Status Display will change dependently. You can do all
configurations and test in this area.
5.3.2 Search ADAM-6000 Modules
After you have confirmed the hardware wiring between host PC and your
ADAM-6000 module, you can find that module in ADAM.NET Utility.
Launch ADAM.NET Utility. Select the ADAM-6000 item on the Mod-
ule Tree Display area. Click the Search Modules button on the Toolbar.
ADAM.NET Utility will then search all ADAM-6000 modules on the
Ethernet network. If your ADAM-6000 modules is used the first time, its
IP will be 10.0.0.1 by default. So you will find it showing on the Others
item under Module Tree.
Note: If network Firewall is enabled on your computer, you
may not be able to connect with your ADAM-6000 mod-
ule. You need to add ADAM.NET Utility into lists of Pro-
gram and Service of the Exception for Windows Firewall
in Windows Control Panel.