User Manual

61 Chapter 5
Tools Menu:
ADAM.NET Utility Toorbar Menu - Tools
1. Search Device - Search all the ADAM-6000 and modules you con-
nected. The operation process will be described in Section 5.3.2.
2. Add Devices to Group - You can add ADAM-6000 modules to your
favorite group by this option. You need to select the device you
want to add in the Module Tree Display area (it will be described
below) first, and then select this option to add.
3. Group Configuration - You can update Firmware, Configuration
File, and HTML files of a single module/multiple modules using
this option. The configuration file includes settings of Device Infor-
mation, General Information, P2P & Streaming, GCL and Modbus
Address XML file. The configuration file can be exported in the
Firmware tab as a .cfg file.
4. Terminal for Command Testing - ADAM-6000 modules support
ASCII command and Modbus/TCP as communication protocol.
You can launch the terminal to communicate with ADAM-6000
module by these two protocol directly. (Refer to Section 6.3 and 6.4
for more information about ASCII and Modbus/TCP command.)
5. Print Screen - You can save current ADAM.NET Utility screen into
an image file by this option.
6. Monitor Stream/Event Data - ADAM-6000 modules support Data
Stream function. You can define the Host (such as a PC) by IP.