User Manual

47 Chapter 4
4.2.3 ADAM-6052
16-ch Source Type Isolated Digital Input/Output Module
The ADAM-6052 is a high-density digital I/O module built-in a 10/100
based-T interface for seamless Ethernet connectivity. It provides 8 digital
input, 8 digital output channels. All of the digital input channels support
input latch function for important signal handling. The digital output
channels support the source type output. Meanwhile, these DI channels
allow to be used as 3 kHz counter and frequency input channels. Opposite
to the intelligent DI functions, the digital output channels also support
pulse output function.
ADAM-6052 Specifications
• Communication: 10/100 Base-T Ethernet
• Supports Protocol: Modbus/TCP, TCP/IP, UDP, HTTP, ICMP, DHCP
and ARP
• Supports Peer-to-Peer and GCL (Refer to Section 5.3.5 and Chapter 7)
Digital Input
• Channels: 8
• Dry Contact:
Logic level 0: Open
Logic level 1: Close to Ground
• Wet Contact:
Logic level 0: 0 ~ 3 V
DC
Logic level 1: 10 ~ 30 V
DC
• Supports 3 kHz counter input (32-bit + 1-bit overflow)
• Supports 3 kHz frequency input
• Supports inverted DI status
Digital Output
• Channels: 8
• Source Type: 10 ~ 35 V
DC
, 1 A (per channel)
• Supports 5 kHz pulse output
• Supports high-to-low and low-to-high delay output