User Manual

ADAM-6000 Series User Manual 46
Figure 4.16: ADAM-6051 DO Wiring
Assigning Addresses in ADAM-6051 Modules
Based on Modbus/TCP standard, addresses of the I/O channels in
ADAM-6000 modules are defined by a simple rule. Please refer to
Appendix B.2.6 to map the I/O address. All digital input channels in
ADAM-6051 are allowed to use as 32-bit counters (Each counter is two
addresses, Low and High). Users could configure the specific DI chan-
nels to be counters via Windows Utility (Refer to Section 5.3).