User Manual

ADAM-6000 Series User Manual 40

4.2 Digital I/O Modules

4.2.1 ADAM-6050

18-ch Isolated Digital I/O Module

The ADAM-6050 is a high-density I/O module built-in a 10/100 based-T

interface for seamless Ethernet connectivity. It provides 12 digital input

and 6 digital output channels with 2000 VDC isolation protection. All of

the digital input channels support input latch function for important signal

handling. Meanwhile, these DI channels allow to be used as 3 KHz coun-

ter and frequency input channels. Opposite to the intelligent DI functions,

the digital output channels also support pulse output function.

ADAM-6050 Specifications

• Communication: 10/100 Base-T Ethernet

• Supports Protocol: Modbus/TCP, TCP/IP, UDP, HTTP, ICMP, DHCP

and ARP

• Supports Peer-to-Peer and GCL (Refer to Section 5.3.5 and Chapter 7)

Digital Input

• Channels: 12

• Dry Contact:

Logic level 0: Close to GND

Logic level 1: Open

• Wet Contact:

Logic level 0: 0 ~ 3 V

Logic level 1: 10 ~ 30 V

• Maximum filter frequency: 8 kHz

• Supports 3 kHz counter input (32-bit + 1-bit)

• Frequency input range: 0.2 Hz~ 3 kHz

• Supports inverted DI status

Digital Output

• Channels: 6

• Sink type: Open Collector to 30 V, 100 mA (maximum load)

• Supports 5 kHz pulse output

• Supports high-to-low and low-to-high delay output