User Manual

267 Appendix B
4. When DI channel is configured as “High to low latch” or “Low to
high latch”, this bit will be 1 if the latch condition occurs. After
that, value of this bit will keep 1 until user writes 0 to this bit (clear
the latch status).
5. Decide how many pulses will be generated. When user writes 0 to
this bit, it will continuously generate pulse.
6. During the pulse generation, user can use this bit to generate more
pulses. For example, “Absolute pulse” is set as 100. During its gen-
eration, user can set “Incremental pulse” as 10. After the 100 pulses
are generated, the extra 10 pulses will continue to be generated.
7. Provide module number
8. Internal counter for logical operation (GCL function)