User Manual

65 Chapter 5
Module Tree Display Area
ADAM.NET Utility Module Tree Display Area
ADAM.NET Utility is one complete software tool that all ADAM remote
I/O module and controller can be configured and operated in this utility.
The Module Tree Display is on the left part of the utility operation win-
dow. There are four categories in the Module Tree Display Area:
• ADAM4000_5000
All serial I/O Modules (ADAM-4000 and ADAM-5000 RS-485 serial
modules) connected to the host PC will be listed in this category.
• ADAM5000TCP_6000
All Ethernet I/O Modules (ADAM-6000 and ADAM-5000 TCP
modules) connected to the host PC will be listed in this category.
• ADAM-4500_5510Series
This is a DOS interface utility for remote controllers such as ADAM-
4500 and ADAM-5510 series.
• Favorite Group
You can define which devices listed in the three categories above into
your personal favorite group. This will make you easier to find your inter-
ested modules. Right click on the ADAM device item under the Favorite
Group item and you can select New >> Group to create a new group.
After you create your own group, right click on your group and select
New >> Adam device to add ADAM devices into your group. You can
also select Diagnose connection to check the communication.
Note: Remember to choose the correct module in the Module
Type combo box when you add a new ADAM devices.