User Manual

ADAM-6000 Series User Manual 280
C.3.2 System Shielding
Figure C.11: System Shielding
• Never stripping too much of the plastic cable cover. This is improper
and can destroy the characteristics of the Shielded-Twisted-Pair cable.
Besides, the bare wire shield easily conducts the noise.
• Cascade these shields together by soldering. Please refer to following
page for further detailed explanation.
• Connect the shield to Frame Ground of DC power supply to force the
conducted noise to flow to the frame ground of the DC power supply.
(The ‘frame ground’ of the DC power supply should be connected to the
system ground)