User Manual

ADAM-6000 Series User Manual 264
Remarks:
1. How to retrieve the counter/frequency value:
Counter (decimal) = (value of 40002) x 65535 + (value of 40001)
Frequency (decimal) = (value of 40001)/10 Hz
2. Time Unit: 0.1 ms
3. If the count number is overflow, this bit will be 1. Once this bit is
read, the value will return to 0.
4. When DI channel is configured as “High to low latch” or “Low to
high latch”, this bit will be 1 if the latch condition occurs. After
that, value of this bit will keep 1 until user writes 0 to this bit (clear
the latch status).
5. Decide how many pulses will be generated. When user writes 0 to
this bit, it will continuously generate pulse.
6. During the pulse generation, user can use this bit to generate more
pulses. For example, “Absolute pulse” is set as 100. During its gen-
eration, user can set “Incremental pulse” as 10. After the 100 pulses
are generated, the extra 10 pulses will continue to be generated.
7. Specific counter channel