User Manual

ADAM-6000 Series User Manual 94
the Status Display area. You can clear latch by clicking the Clear latch
button. It is the same as DI mode that you can enable or disable the Invert
DI Status function in the Setting area. Remember to click the Apply all
button for all channels or Apply this button for this specific channel to
complete the configuration.
4. High to Low Latch
When you choose High to Low Latch mode, once the digital input chan-
nel detects logic level changes from high to low, the logic status will be
keep as logic high. The logic status will remain the logic high, until you
clear latch manually. Then the logic status will back to logic low. The
logic status can be seen by the Latch status LED display at the bottom of
the Status Display area. You can clear latch by clicking the Clear latch
button. It is the same as DI mode that you can enable or disable the Invert
DI Status function in the Setting area. Remember to click the Apply all
button for all channels or Apply this button for this specific channel to
complete the configuration.