User Manual

91 Chapter 5
Individual Channel Configuration
You can see digital input value and configure setting for each digital input
channel. It is the same that you can control the digital output value and
configure setting for each digital output channel. Simply click the channel
interested in the Individual Channel Configuration items.
If you choose a digital input channel, the Status Display area should look
similar to Figure 5.14 below.
Figure 5.15: Individual Channel Configuration: DI
You can choose different mode for that digital input channel by choosing
the DI mode combo box at top of Status Display area. (You should
choose the appropriate mode depending on the hardware specification.)
After you have chosen the mode, click the Apply mode button. There are
a total of five possible DI modes you can choose: