User manual

Planning Your Application Program
$aaSiCjAh
Name Read Alarm Disable/Latch
Chapter 6
Description Return the alarm mode for the specified channel.
Syntax $aaSiCjAh(cr)
$ is a delimiter character.
aa (range 00-FF) represents the 2-character hexadeci-
mal Modbus network address of an ADAM-5000/
TCP system. SiCj identifies the desired slot i and the
desired chan- nel j.
A is the Read Alarm Mode command.
h indicates alarm type and can have the value H =
High alarm, L = Low alarm
(cr) represents terminating character, carriage return
(0Dh)
Response !aap(cr) if the command was valid There is no
response if the system detects a syntax error or
communication error or if the specified ad- dress
does not exist.
! delimiter character indicating a valid command was
received.
aa represents the 2-character hexadecimal Modbus
address of the corresponding ADAM-5000/TCP sys-
tem.
p indicates alarm mode.
p=D, if alarm is Disable.
P=L, if alarm is Latch.
(cr) represents terminating character, carriage return
(0Dh)
ADAM-5000/TCP User’s Manual
6-173