User manual

Planning Your Application Program
Chapter 6
Command Syntax Command Name Description
$aaSiCj6 Clear Counter
Clear the counters of the specified
counter/frequency module
The command requests the
$aaSi7
Read Overflow
Flag
@aaSiCjP(data)
Set Initial Counter
Value
@aaSiCjG
Read Counter
Initial Value
$aaSiCjAhEs
Set Alarm
Disable/Latch
$aaSiCjAh
Read Alarm
Disable/Latch
$aaSiCjCh
Clear Alarm
addressed module to return the status of the
overflow flag of counter.
Set initial counter value for counter of the
specified counter module.
Read initial of the specified counter
module.
The addressed counter module is
instructed to set alarm disable or latch.
Returns the alarm mode for the
specified channel.
Status
Returns the alarm status to normal
Connects the High/Low alarm of the
$aaSiCjAhCSkCn
Set Alarm
Connection
$aaSiCjRhC
Read Alarm
Connection
$aaSiCjAhU
(data)
Set Alarm Limit
$aaSiCjRhU Read Alarm Limit
$aaSiCjS
Read Alarm
Status
specified input channel to the specified digital
output in the addressed ADAM-
5000 system
Returns the High/Low alarm limit output
connection of a specified input channel in the
addressed ADAM-5000 system
Sets the High/Low alarm limit value for the
specified input channel of a specified
ADAM-5000 system.
Returns the High/Low alarm limit value for
the specified input channel in the addressed
ADAM-5000 system
Reads whether an alarm occurred for the
specified input channel in the specified
ADAM-5000 system
Table 6-10: Counter/Frequency Command Set Table
ADAM-5000/TCP User’s Manual
6-149