User manual

Chapter 1
Understanding Your System
1-2-4 Communicating Isolation
High-speed transient suppressors isolate ADAM-5000/TCP Series Ethernet
port from dangerous voltage up to 1500V
DC
power spikes and avoid
surge damage to whole system.
1-2-5 Completed set of I/O modules for
total solutions
The ADAM-5000/TCP Series uses a convenient backplane system
common to the ADAM-5000 series. Advantech’s complete line of
ADAM-5000 mod- ules integrates with the ADAM-5000/TCP Series to
support your applications
(not include ADAM-5090). Full ranges of digital module supports 10 to
30 V
DC
input and outputs. A set of analog modules provide 16-bit
resolution and programmable input and output (including bipolar) signal
ranges. For details, refer to Chapter
4 I/O Modules.
1-2-6 Built-in real-time OS and watchdog timer The
microprocessor also includes a real-time OS and watchdog timer. The
real-time OS is available to handle several tasks at the same time. The
watchdog timer is designed to automatically reset the microprocessor if
the system fails. This feature greatly reduces the level of maintenance
required and makes the ADAM-5000/TCP Series ideal for use in
applications which require a high level of system performance and
stability.
1-2-7 Software Support
Based on the Modbus standard, the ADAM-5000/TCP
Ser iesfirmware is a built-in Modbus/TCP server. Therefore,
Advantech provides the neces- sary DLL drivers, OCX component OPC
Server, and Windows Utility for users for client data for the ADAM-
5000/TCP Series. Users can configure this DA&C system via Windows
Utility; integrate with HMI software pack- age via Modbus/TCP driver
or Modbus/TCP OPC Server. Even more, you can use the DLL driver
or OCX component to develop your own applications.
1-4 ADAM-5000/TCP User’s Manual