User manual

Chapter 6
Planning Your Application Program
6-4-3 Analog Input Command Set Before setting
commands, the user needs to know the type of main unit being used. If
ADAM-5000/485 is being used, the “i” in Si can be set at
0 to 3. If ADAM-5000E or ADAM-5000/TCP is being used, the “i” in Si
can be set at 0 to 7.
ADAM-5013 RTD Input Command Set
Command Syntax Command Name Description
$aaSiArrff RTD Configuration Sets slot index, input
range, data format
and integration time
for a specified RTD
input module in a
specified system
$aaSiB RTD Configuration
Status
Returns the
configuration
parameters for a
specified RTD input
module in a specified
system
$aaSi All RTD Data In Returns the input
values of all channels
of a specified RTD
input module of a
specified system in
engineering units
$aaSiCj Specified RTD Data
In
Returns the input value
of a specified channel
for a specified RTD
input module of a
specified system in
engineering units
6-48 ADAM-5000/TCP User’s Manual