Manualshelf

Datasheet

ManualsBrandsAdvantech ManualsModules8-Slot Distributed DA&C System
21222324252627282930
www.advantech.com/products
Online Download
1-19
8
5
44
10
CompactPCI
9
Plug-in I/O
8
AWS
7
FPM
6
IPPC
TPC
RS-485 I/O
3
UNO
2
BAS
1
PAC & Software
11
Signal Conditioning
12
USB I/O
13
Motion Control I/O
14
Ethernet Switch
15
EDG
16
ICOM
17
Ethernet I/O
Maximum System Design Flexibility
The ADAM-5000's modular design allows users to tailor
solutions based on their own requirements. Built-in
programmable I/O ranges and alarm outputs enhance
flexibility in system design. A variety of communication
media such as twisted-pair wiring, radio modems and fiber
optics are supported.
System Maintenance and Troubleshooting
The ADAM-5000 series uses hardware self-test and
software diagnosis to monitor system problems.
Also included is a watchdog timer that monitors the
microprocessor. If the system crashes, the watchdog
automatically resets the system. Node ID setting is
easily accomplished by setting a DIP switch on the front
of the system.
Easy Installation and Networking
The ADAM-5000 series can be easily mounted on a
DIN-rail or on a panel. Signal connections, network
modifications and maintenance are simple and quick.
Building a multi-drop network only requires a single
twisted pair of wires.
Proven for Industrial Environments
The ADAM-5000 series can operate in industrial
environments at temperatures between -10
and 70
°
C,
and can use unregulated power sources between 10 and
30 V
DC
. These units are protected against accidental power
supply reversals. A 3-way isolation design (I/O, power &
communication) prevents ground loops and reduces the
effect of electrical noise in the system.
Extensive Software Support
The ADAM-5000 series is supported by most standard
process controls and HMI software. .NET Class LIB is
provided for use with Windows applications. OPC drivers
provide links to a wide range of HMI/SCADA software
packages such as InTouch, FIX and ICONICS. Advantech
data acquisition software and Advantech Studio SCADA/
HMI software are both tightly integrated with the ADAM-
5000 systems.
Distributed Data Acquisition and Control Systems
DIN-rail Mounting
Installed with industrial standard DIN-rails
Simple & Low Cost Network Diagram
Panel/Wall Mounting
Flat surface system mounting
Node ID Setting
8-pin dip switch configuration
Connection
Pre-wired plug-in terminals with I/O modules