Datasheet

Programmable Automation Controllers & Software
Features
1-16
ADAM-5510KW
ADAM-5510EKW
Introduction
ADAM-5510EKW and ADAM-5510KW are PC-based Soft-Logic Controllers. They feature 5 standard IEC61131-3 programming languages so PLC users can develop control strategies
in their familiar programming languages. The strong MULTIPROG software and stable ProConOS make ADAM-5510EKW and ADAM-5510KW the best choice for PC-based Soft-logic
controllers in the market.
ProConOS, (Programmable Controller Operating System), has over 250,000+ installations, and is a pre-emptive, multi-tasking run-time software providing deterministic operation
down to one millisecond and runs applications developed with MULTIPROG, a fully-featured IEC 61131-3 development environment. With this KW Software distribution agreement,
Advantech has bundled the ProConOS run-time software on ADAM-5510EKW and ADAM-5510KW Controllers creating a SoftLogic Solution. It will greatly benefit PLC users to enjoy
the PC- based advantage of ADAM-5510EKW and ADAM-5510KW
Different from the original ADAM-5510 hardware, the ADAM-5510EKW and ADAM-5510KW includes more memory to raise system efficiency and users’ programming flexibility. The
main unit of ADAM-5510EKW and ADAM-5510KW include a 1.5 MB flash memory and 640 KB SRAM which includes battery backup RAM up to 32 KB. In addition, 4 COM ports
enrich the communication capacity of ADAM-5510EKW and ADAM-5510KW to integrate with remote I/O or other 3rd party devices based on the Modbus/RTU protocol.
For advanced system integration, the ADAM-5510EKW and ADAM-5510KW are built with a Modbus/RTU Server. Therefore, it also supports Modbus/RTU protocol to communicate
with any Modbus
®
devices as well as HMI Software/User’s APs built with Modbus driver or Modbus/RTU OPC Server, both of which are included in the SCADA systems.
4-slot PC-based SoftLogic Controller
8-slot PC-based SoftLogic Controller
IEC-61131-3 standard package
Supports LD/FB/SFC/IL/ST language
Graphical programming interface
Cross programming language compiling capability
Supports floating point calculation
Supports AI/AO/DI/DO/Counter Function Blocks
Powerful debug tool
Built-in Modbus/RTU Master and Slave
Supports up to 128 Local I/O Points
Handles typical 32 Modbus/RTU remote I/O modules
Supports more than 9000 coils in LD language
Supports 3 serial ports including 1 RS-485 and 2 RS-232/485 ports












Specifications
Control System
CPU 16-bit microprocessor
I/O Capacity
4 slots (ADAM-5510KW)
8 slots (ADAM-5510EKW)
LED Indicators
Power, CPU, communication and battery
Memory
Flash disk: 512 KB
Flash memory: 768 KB
Flash ROM: 256 KB
RAM: 640 KB SRAM, 32 KB with battery backup
Operating System
ROM-DOS
Real-time Clock
Yes
Watchdog Timer
Yes
Communications
Comm. Protocol Modbus/RTU
Max. Nodes
32 (in RS-485 daisy-chain network)
Medium
RS-485 (2-wire)
Transmission Distance
1.2 km (4000 feet)
Transmission Speed
9600, 19200 and 38400 bps
Protection
Power Input
3000 V
DC
Communication 2500 V
DC
(COM2 only)
Power Reversal Yes
Protection















Power
Power Consumption 4 W @ 24 Vdc (not including I/O modules)
Power Input
Unregulated 10 ~ 30 V
DC
General
Certifications CE
Connectors ADAM-5510KW: 1 x DB9-M for RS-232 (COM1)
ADAM-5510EKW: 1 x DB9-M for RS-232/485 (COM1)
1 x Screw terminal for RS-485 (COM2)
1 x DB9-F for RS-232/Programming (COM3)
1 x DB9-M for RS-232/485 (COM4)
1 x Screw-terminal for power input
Dimensions 4-slot: 231 x 110 x 75 mm
8-slot: 355 x 110 x 75 mm
Enclosure ABS+PC
Mounting DIN 35 rail, stack, wall
Environment
Humidity 5 ~ 95%, non-condensing
Operating Temperature
-10 ~ 70° C (14 ~ 158° F)
Storage Temperature
- 25 ~ 85° C (-13 ~ 185° F)
Ordering Information
ADAM-5510KW PC-based SoftLogic Controller
ADAM-5510EKW 8-slot PC-based SoftLogic Controller
MPROG-BAS 33 KW Multiprog Softlogic Development Kit Basic Edition
v3.3 for Windows
®
NT/2000/XP (128-byte I/O)












