User Manual

36 ADAM-4572 User's Manual
A.1 OPC Server
When you want to use the OPC Server with Modbus/TCP protocol,
please refer to the following. Since OPC servers from different vendors
could vary, we will use the Advantech Modbus/TCP OPC Sever as an
example. For further details, please refer to each manual.
Device Setting
Enter the proper settings for your ADAM-4572 device.
Figure A-1: Device Property Setting
IP Address
You should enter the proper IP address for the ADAM-4572; otherwise it
will not be located on the network.
TCP Port
This is the TCP port on the ADAM-4572 you want to connect to (default
502). You should enter the proper TCP port for the ADAM-4572; other-
wise it is not to be found on the network.