User Manual

22 ADAM-4572 User's Manual
3.2.2 Network Configuration
Figure 3-6: Network Setting Window
MAC Address
This is also called Ethernet address and needs no further configuration.
Link Speed
This function will show the current linking speed to be either 10Mbps or
100Mbps. However, the utility will auto-detect the current transmission
speed on the network segment and set the transmission speed for the
device accordingly without your further efforts.
Duplex Mode
The utility will detect the current transmission mode (half-duplex or full-
duplex) on the network segment, and set the transmission mode for the
device accordingly without your further efforts.
IP address, Subnet Mask, Default Gateway
The IP address identifies your ADAM-4572 device on the global net-
work. Each ADAM-4572 has same default IP address 10.0.0.1. You have
to ask your network administrator to obtain a specific IP address and
then configure each ADAM-4572 with the individual IP address.