User Manual

18 ADAM-4572 User's Manual
3.1 Installation of Utility Software
Before you use the ADAM-4572, you have to install the ADAM-4572
configuration utility. Please follow the steps as described below:
1. Insert the ADAM-4572 configuration utility diskette into the floppy
drive (e.g. a:\) on the host PC. Change the host computer’s default
drive from C: to A:
2. Use your Windows Explorer or the Windows Run command to execute
the Setup Program. (The path for the Setup program on diskette should
be A:\setup.exe, if your default floppy drive is A:).
Figure 3-1: Installing Configuration Utility
3. The Setup program will specify for you a default installation path,
C:\Program Files\Advantech\ADAM4572. If you are not satisfied with
the default installation path, just click the Browse button to change to
another path. After you have specified the installation path, click the
Next button. The program will start to copy the program files to your
computer.