User Manual

Chapter 8
Chapter 8 Calibration
8-3
4. Execute the Offset Calibration command. This is also done through
the ADAM utility software. (Please see “Offset Calib ration” option
in the Calibration sub-menu of the ADAM utility software).
Figure 8-2 Zero Calibration
5. Execute th e Sp an Calib ration co mmand. This can b e done throug h
the ADAM utility software. (Please see “Span Calibration” option in
the Calibration sub-menu of the ADAM utility software).
Figure 8-3 Span Calibration