User Manual

Digital I/O and Relay Output
Counter/Frequency Command Set
7- 60 ADAM 4000 Series User’s Manual
7.2.4 Digital Output and Alarm Command Set
Command Synt
ax
Command Name
Description
I/O Module
@AAPN(data)
Set Initial Count Value
of Counter N
Sets the inital count value of
the module for counter 0 or
counter 1
4080
@AAGN
Read Initial Count
Value of Counter N
Read the initial count value of
counter 0 or counter 1
4080
@AAEAN
Enable Alarm of
Counter N
Enable alarm for the specified
counter 0 or counter 1
4080
@AADAN
Disable Alarm of
Counter N
Disable alarm for the specified
counter 0 or counter 1
4080
@AAPA(data)
Set Alarm Limit Value
of Counter 0
Download
the alarm limit value
for counter 0 of the specified
module
4080
@AASA(data)
Set Alarm Limit Value
of Counter 1
Download the alarm limit value
for counter 1 of the specified
module
4080
@AARP
Read Alarm Limit
Value of Counter 0
Ask the module to return
the
alarm limit value of counter 0
4080
@AARA
Read Alarm Limit
Value of Counter 1
Ask the module to return the
alarm limit value of counter 1
4080
@AADO(data)
Set Digital Output
Values
Set the values of the module's
two digital outputs (ON or OFF)
4080,
4080D
@AADI
Read Digital Output
and Alarm Status
Ask the addressed module to
return the state of its two digital
output channels and the status
of its alarm
4080,
4080D
(Continued on next page)