User Manual

5-50 ADAM 4000 Series User’s Manual
4011, 4011D, 4012, 4016
@AADO
Name Set Digital Output command
Description Sets the values of the module’s digital outputs (ON or OFF).
Syntax @AADO(data)(cr)
@ is a delimiter character.
AA ( range 00-FF) represents t he 2 -character hexadecimal
address of an analog input module.
DOis the Set Digital Output command.
(data) is the t wo-character parameter that sets the state for
the digital output bits of the module, as shown below:
For ADAM-4011/4011D/4012:
00 all D/O bits are OFF
01 DO0 is ON, DO1 is OFF
02 DO0 is OFF, DO1 is ON
03 all bits are ON
For ADAM-4016:
00 DO0 and DO1 are OFF
01 DO0 is ON, DO1 is OFF
02 DO0 is OFF, DO1 is ON
03 DO0 and DO1 are ON
10 DO2 and DO3 are OFF
11 DO2 is ON, DO3 is OFF
12 DO2 is OFF, DO3 is ON
13 DO2 and DO3 are ON
(cr)
represents terminating character, carriage return (0Dh).
Response !AA(cr)if the command was valid.
?AA(cr)
if an invalid parameter was entered.
There is n o response if t he module detects a sy ntax error or
communication error or if the specified address does not exist
!delimiter character indicates a valid command was received.
?delimiter character indicates the command was invalid.
AA
represents the 2-cha racter hexa decimal address of the
responding analog input module.
(cr)
represents terminating character, carriage return (0Dh).