User Manual

5-28 ADAM 4000 Series User’s Manual
4015, 4015T, 4017+, 4018+, 4019+
$AA7CiRrr
Name Single Channel Range Configuration command
Description This command configures t he in put typ e an d range of the
specified channel in an analog input module.
Syntax $AA7CiRrr(cr)
$ is a delimiter character.
AA (range 00-FF) represents the 2-character he xadecimal
address of t he anal og i nput m odule which i s t o be
configured.
7 is the Single Channel Range Configuration command.
Ci re presents the speci fied input cha nnel you wa nt t o
configure.
Rrr represents the type and range you want to set. (Refer to
Table 5-1 on Page 5-6 to check range codes)
(cr) is the terminating character, carriage return (0Dh).
Response !AA(cr) if the command was valid.
?AA(cr) if an invalid operation was entered.
There is no response if the module detects a syntax error or
communication e rror or if the s pecified a ddress does not
exist.
! delimiter character i ndicates a valid command wa s
received.
? delimiter character indicates the command was invalid.
AA (range 00-FF) represents the 2-character he xadecimal
address of the analog input module.
(cr) represents terminating character, carriage return (0Dh).
Example command: $027C5R21(cr)
response: !02(cr)
The c ommand co nfigures t he ra nge of c hannel 5 i n t he
analog i nput module at address 02 as Pt 100(IEC) 0 ~ 100
℃.