User Manual

Chapter 5
5-27 ADAM 4000 Series User’s Manual
4015, 4015T, 4017+, 4018+, 4019+
$AA1Ci
Name Single Channel Offset Calibration command
Description The command calibrates a specified channel to c orrect for
offset errors.
Syntax $AA1Ci(cr)
$ is a delimiter character.
AA (range 00-FF) represents the 2-character he xadecimal
address of t he anal og i nput m odule which i s t o be
calibrated.
1 is the Single Channel Offset Calibration command.
Ci re presents the speci fied input cha nnel you wa nt t o
calibrate.
(cr) is the terminating character, carriage return (0Dh).
Response !AA(cr) if the command was valid.
?AA(cr) if an invalid operation was entered.
There is no response if the module detects a syntax error or
communication e rror or if the s pecified a ddress does not
exist.
! delimiter character i ndicates a valid command wa s
received.
? delimiter character indicates the command was invalid.
AA (range 00-FF) represents the 2-character he xadecimal
address of the analog input module.
(cr) represents terminating character, carriage return (0Dh).
Example command: $021C5(cr)
response: !02(cr)
The c ommand calibrates c hannel 5 of the analog i nput
module at address 02 for correcting offset errors.