User Manual

Chapter 4
Chapter 4 Command Set 4-43
ADAM-4080D Command Table (Continued)
Command Syntax
Command Name
Command Description
Page
No.
@AAEAT
Enable Alarm
Enable the alarm in either
momentary or latching mode
7
-
69
@AADA
Disable Alarm
Disable all alarm functions
7
-
70
@AACA
Clear Latch Alarm
The latch alarm is reset
7
-
71
@AAPA(data)
Set Low
-
Alarm
Count Value of
Counter 0
Downloads the low
-
alarm count
value for counter 0 of the specified
counter/frequency module
7
-
72
@AASA(data)
Set High
-
Alarm
Count Value of
Counter 0
Downloads the high
-
alarm count
value for counter 0 of the specified
counter/frequency module
7
-
73
@AARP
Read Low
-
Alarm
Count Value of
Counter 0
Ask the addressed modul
e to
return its low-alarm count value for
counter 0
7
-
74
@AARA
Read High
-
Alarm
Count Value of
Counter 0
Ask the addressed module to
return its high-alarm count value
for counter 0
7
-
75
@AADO(data)
Set Digital Output
Values
Set the values of the module's
two
digital outputs(ON or OFF)
7
-
67
@AADI
Read Digital Output
and Alarm Status
Ask the module to return the status
state of its two digital outputs and
the status of its alarm.
7
-
68