User Manual

Command Set
4- 42 ADAM 4000 Series User’s Manual
ADAM-4080D Command Table (Continued)
Command Syntax
Command Name
Command Description
Page
No.
$AA4S
Enable/Disable
Digital Filter
Enables or disables the digital
filter of the addressed
counter/frequency module
7
-
49
$AA4
Read Filter Stat
us
The addressed counter frequency
module returns the status of its
digital filter
7
-
50
$AA0H(data)
Set Minimum Input
Signal Width at High
Level
Sets the minimum input signal
width at high level for a specified
counter/frequency module
7
-
51
$AA0H
Read
Minimum Input
Signal Width at High
Level
Reads the minimum input signal
width setting at high level for a
specified counter/frequency
module
7
-
52
$AA0L(data)
Set Minimum Input
Signal Width at Low
Level
Sets the minimum input signal
width at low level for a specified
counter/frequency module
7
-
53
$AA0L
Read Minimum Input
Signal Width at Low
Level
Reads minimum input signal
width setting at low level for a
specified counter/frequency
module
7
-
54
$AA1H(data)
Set Non
-
isolated
High Trigger Level
Sets the
high trigger level of
non-isolated input signals for a
specified counter/frequency
module
7
-
55
$AA1H
Read Non
-
isolated
High Trigger Level
Requests the addressed counter
frequency module to return the
high trigger level for non-isolated
input signals
7
-
56
$AA1L(data)
Set Non
-
isolated Low
Trigger Level
Sets the low trigger level of
non-isolated input signals for a
specified counter/frequency
module
7
-
57
$AA1L
Read Non
-
isolated
Low Trigger Level
Sets the low trigger level of
non-isolated input signals for a
specified counter/frequency
module
7
-
58
(Continued on following page)