User Manual

Chapter 4
Chapter 4 Command Set 4-39
ADAM-4080 Command Table (Continued)
Command Syntax
Command Name
Command Description
Page
No.
@AAPN(data)
Set Initial Count
Value of Counter N
Sets the initial count value of the
module for counter 0 or counter 1
7
-
61
@AAGN
Read Initial Count
Value of Counter N
Reads the initial count value of
counter 0 or counter 1
7
-
62
@AAEAN
Enable A
larm of
Counter N
Enable alarm for the specified
counter 0 or counter 1
7
-
63
@AADAN
Disable Alarm of
Counter N
Disable alarm for the specified
counter 0 or counter 1
7
-
64
@AAPA(data)
Set Alarm Limit Value
of Counter 0
Download the alarm limit value for
counter 0 of the specified module
7
-
65
@AASA(data)
Set Alarm Limit Value
of Counter 1
Download the alarm limit value for
counter 1 of the specified module
7
-
65
@AARP
Read Alarm Limit
Value of Counter 0
Ask the module to return the alarm
limit value of counter 0
7
-
66
@AARA
Read Alarm Limit
Value of Counter 1
Ask the module to return the alarm
limit value of counter 1
7
-
66
@AADO (data)
Set Digital Output
Values
Set the values of the module's two
digital outputs (ON or OFF)
7
-
67
@AADI
Read Digital Output
and Alarm Status
Ask the module to return the
status state of its two digital
outputs and the status of its alarm.
7
-
68