User`s manual

ACP-7000 User’s Manual 16
2.1.5 CPU Card and Add-on Cards Installation
a. Open the top cover and move aside the cardholder by two screws
b. Find out the location of PICMG slot, take out I/O bracket first, and
install SBC(CPU card)
c. Connect the 5Vsb and PS_ON cable of power supply to SBC.
See Figure 2.11
d. Find the location of PCI or ISA slot, take out the I/O bracket first,
and install add-on card.
e. After all the CPU card and add-on cards installation, fix them
tightly with backplane holder by screw and fix them well by
cardholder.
Figure 2.9: SCSI SCA-2 HDD
Figure 2.10: Returning 3.5" Mobile Drawer